'Other' Constructional and Allied Systems Info & Downloads

Select System Type      Select Country      System Text Search
(1209 systems found)

Model Bridge and The Bridge Builder
Construction Sets

Model Bridge and The Bridge Builder construction sets were both very similar Meccano-like sets to make model bridges. They date from around 1913/4. Manufacturers unknown.

Model Bridge


Manufacturer / Distributor

An unknown company from United Kingdom


Info from the Metal Constructional Systems Database for MODEL BRIDGE (Ref:MLB)

Maker
 
System Type
Meccano principle but sig. differences
Country
United Kingdom
Dates
known in circa 1914
Material
Steel
Thread
 
Boss Type
 
Boss Thread
 
Diametrical Pitch of Gears
--
No. of Parts in System
7
Hole Pitch (Spacing) (mm)
12.7 (multiples of value shown, including half.)
Diameter of holes in Strips(mm)
4.3
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
 
Types of Nuts and Bolts
Nuts: square
Bolts: cheese (slotted)
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
Bolt diameter (mm)
 

Comments
Parts like MECCANO but unneeded holes omitted. THE BRIDGE BUILDER was similar. Sets for other models probably include Single Angle Strip; 3x8h Flanged Plate, & 3¼x3¼” Flanged Plate with only centre hole.

Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here

NOTE : If the 'Other Systems Newsletter' pages for MODEL BRIDGE do not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.



The Bridge Builder


Manufacturer / Distributor

An unknown company from United Kingdom


Info from the Metal Constructional Systems Database for THE BRIDGE BUILDER (Ref:TBB)

Maker
 
System Type
Meccano principle but sig. differences
Country
United Kingdom
Dates
known in circa 1914
Material
 
Thread
 
Boss Type
 
Boss Thread
 
Diametrical Pitch of Gears
 
No. of Parts in System
 
Hole Pitch (Spacing) (mm)
 
Diameter of holes in Strips(mm)
 
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
 
Types of Nuts and Bolts
Nuts:
Bolts:
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
Bolt diameter (mm)
 

Comments
See MODEL BRIDGE.

Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here

NOTE : If the 'Other Systems Newsletter' pages for THE BRIDGE BUILDER do not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.